Communicate: Connecting PC to LPC

Connect the DB25M end of the serial cable to the 8000A Host Serial Port J104 (DB25F), and the DB9F end of the serial cable to your PC DB9M serial port. The port should be the one selected in the File | Setup screen.
If you do not have an appropriate serial cable, you can order one from us.
Setting Up the LPC for Communications
Press MORE to see the HOST SETUP menu.
HOST INTERFACE: Enable the interface.
BAUD RATE: Set it to the same value as the File | Setup screen, for example, 9600.
PARITY: Set to none.
DATA BITS: Set to 8.
STOP BITS: Set to 1.